HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 49)

Command line 49
Item Description
AddressType (optional) The source of MAC address assignments to be used during the creation of the
new connection. If not specified, the default is the domain default. If
"User-Defined" is specified, the iSCSI MAC address must be specified. Valid
values include "Factory-Default" and "User-Defined".
iScsiMAC (required if
AddressType is
User-Defined)
The user-defined iSCSI MAC address to use for the connection.
SpeedType (optional) The requested operational speed for the server port. Valid values include
"Auto", "Preferred", "Custom", and "Disabled". The default value is
"Preferred".
If the speed type is "Auto", the maximum port speed is allocated but is
constrained by the maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, the speed type defaults to "Auto".
If the speed type is "Custom", you can configure a speed (using the Speed
property) from 100Mb to the MAX configured speed for the network in 100Mb
increments.
If the speed type is "Disabled", bandwidth is not allocated and the server port
status is "Administratively Disabled".
Speed (required if the
SpeedType is Custom)
The user-defined speed for the server port. Valid values include from 100Mb to
the MAX configured speed for the network in 100Mb increments.
Examples
->add iscsi-connection MyNewProfile Network=SomeNetwork
Adds a new iSCSI connection to the profile
->add iscsi-connection MyNewProfile
Adds a new iSCSI connection and leaves it unassigned
->add iscsi-connection MyNewProfile
AddressType=Factory-Default
Adds a new iSCSI network connection and uses factory-default addresses
->add iscsi-connection MyNewProfile
AddressType=User-Defined iScsiMAC=00-17-A4-77-00-00
Adds a new iSCSI network connection and provides a user-defined MAC
address
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Preferred
Adds a new iSCSI network connection and sets the speed to Preferred
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Custom Speed=2000
Adds a new iSCSI network connection and sets the speed to 2Gb
Item Description
remove
iscsi-connection
Remove the last iSCSI connection from the server VC profile. If no connections
exist, an error message appears.
Syntax
remove iscsi-connection
Parameter
ProfileName (required) The name of an existing profile from which the connection is being removed
Example
->remove iscsi-connection MyProfile