HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 43)

Command line 43
igmp
Manage Ethernet IGMP Snooping settings.
Supported actions: help, set, show
Item Description
set igmp Modify Ethernet IGMP Snooping settings.
Syntax
set igmp [Enabled=] [Timeout=]
[NoFlood=]
Properties
Enabled
(optional)
Enables or disables IGMP Snooping. Valid values include "true" and "false".
Timeout
(optional)
The idle timeout interval (in seconds) for IGMP Snooping. Valid values include integers
from 1-3600. The default IGMP idle timeout is 260 seconds.
NoFlood
(optional)
Allow or prevent the flooding of unregistered multicast packets. Valid values are "true"
and "false". This parameter can be "true" only when IGMP Snooping is enabled,
otherwise flooding always occurs.
Examples
->set igmp Enabled=true
Enables IGMP Snooping
->set igmp Enabled=true Timeout=30
Enables IGMP Snooping and sets the idle timeout
->set igmp Enabled=true NoFlood=true
Enables IGMP snooping and prevents the flooding of unregistered multicast packets
Item Description
show igmp Display Ethernet IGMP Snooping settings.
Syntax
show igmp
Example
->show igmp
Displays IGMP Snooping settings
igmp-group
Display interconnect module IGMP Group table information.
Supported actions: help, show
Item Description
show igmp-group Display interconnect module IGMP Group table information for the specified module.
Syntax
show igmp-group
Parameter
ModuleID
(required)
The ID of the module for which to display the IGMP Group table. The ID is in the format
of :.
Example
->show igmp-group enc0:1
Displays the IGMP Group information for the module in bay 1 of enclosure enc0