HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 33)

Command line 33
Item Description
IMPORTANT: You must set the external manager enabled to "false" using the set
external-manager command before using the remove external-manager
command.
Syntax
remove external-manager [-quiet] [UserName=]
[MacType=] [MacStart=
address>] [MacEnd=]
[WwnType=] [WwnStart=
address>] [WwnEnd=]
[ServerIdType=]
[ServerIdStart=] [ServerIdEnd=
address>]
Option
quiet This option suppresses user confirmation prompts and is useful when scripting
operations.
Properties
UserName (optional) A valid external manager user name. The user name can be identified using the
show external-manager command.
MacType (optional) The type of MAC address source to use for assignment. Valid values include
"Factory-Default" and "User-Defined".
MacStart (required
if the MacType is
User-Defined)
The starting MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
MacEnd (required if
the MacType is
User-Defined)
The ending MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
WwnType (optional) The type of WWN address source to use for assignment. Valid values include
"Factory-Default" and "User-Defined".
WwnStart (required
if the WwnType is
User-Defined)
The starting WWN address in a custom user-defined range
WwnEnd (required if
the WwnType is
User-Defined)
The ending WWN address in a custom user-defined range
ServerIdType
(optional)
The type of the virtual serial number source. When server profiles are created, the
virtual serial numbers and UUID values are allocated from the specified pool
source. Valid values include "Factory-Default" and "User-Defined".
ServerIdStart
(required if Type is
User-Defined)
The starting serial number in a user-defined range. This property is only valid for
user-defined serial number types.
ServerIdEnd
(required if Type is
User-Defined)
The ending serial number in a user-defined range. This property is only valid for
user-defined serial number types.
Examples
->show external-manager
->set external-manager UserName=A17005068 Enabled=false
(where A17005068 is the username reported by the previous command)
->remove external-manager username=A17005068
mactype=User-Defined MacStart=00-17-A4-77-00-00
MacEnd=00-17-A4-77-03-FF wwnType=User-Defined
WwnStart=50:06:0B:00:00:C2:62:00
WwnEnd=50:06:0B:00:00:C2:65:FF serverIdType=User-Defined
serverIdStart=VCX0000000 serverIdEnd=VCX00000ZZ
Displays the username, disables the external manager, and then removes the
external manager and releases the profile control
->remove external-manager UserName=A17005068