HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 72)

Command line 72
Item Description
User-Defined) virtual serial number. The user-defined serial number must start with the pattern
VCX01.
UUID (optional) A unique 128-bit identifier for the virtual server ID. The format is
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, where x is any alphanumeric character. If
no UUID is specified, one is auto-generated. The UUID can be specified only if the
SNType is "User-Defined".
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections and
Virtual Connect default serial numbers
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultFcoeConn
Creates a new profile without adding default FCoE connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn -NoDefaultFcoeConn
Creates a new profile without adding default Ethernet, FC, and FCoE connections
->add profile MyNewProfile2 Nag=DatabaseNetGroup
Creates a new profile and associates it with the DatabaseNetGroup network
access group
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
Creates a new profile and specifies a custom virtual serial number
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
UUID=15713c60-fcf2-11dc-a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile Assign a server profile to a device bay.
Syntax
assign profile [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay (required) The device bay to assign the profile to, in the format
:. If EnclosureID is not specified, it
defaults to the local enclosure. To assign a profile to a multi-blade server,
must be the monarch bay.
Option
PowerOn Powers on the server after the profile is assigned
Examples
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure