HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 44)

Command line 44
interconnect
Manage I/O interconnect modules.
Supported actions: help, set, show
Item Description
set interconnect Modify the interconnect module host name setting.
Syntax
set interconnect [-quiet] [:]
[]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting
operations.
Properties
EnclosureID The ID of the enclosure
BayNumber The Virtual Connect IO bay number
Hostname A string of characters that cannot be longer than 63 characters and must begin
with an uppercase or lowercase alphabetic character. If the hostname parameter
is set to "DEFAULT", the host name is set to the default VC host name.
Host names beginning with "VCE" are reserved.
Examples
->set interconnect enc0:1 Hostname="DevelopmentNetworks"
Sets the host name of interconnect bay 1 in enclosure enc0 to
DevelopmentNetworks
->set interconnect enc0:2 Hostname="DEFAULT"
Resets the host name of interconnect bay 2 in enclosure enc0 to the factory
default
Item Description
show interconnect Display all interconnect modules in the domain.
Syntax
show interconnect [|*]
Parameter
ModuleID (optional) The ID of the interconnect module. Use “*” to display a detailed view of all
modules in the VC domain. If not specified, a summary output of all modules
appears.
Examples
->show interconnect
Displays a summary of all interconnect modules
->show interconnect *
Displays detailed information for all interconnect modules
->show interconnect *:5
Displays detailed information for all enclosures with interconnect modules in
interconnect bay number 5
->show interconnect enc0:*
Displays interconnect modules in all bays of a specific enclosure
->show interconnect enc0:3
Displays detailed information on a specific interconnect module in interconnect
bay 3 of the primary enclosure