HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 9)

Introduction 9
Command Changes Virtual Connect 3.60 Virtual Connect
3.70/3.75
save ssl-csr This command includes
new data fields for
additional certificate
information. If the private
key size is 1024 bits, then
this command also
upgrades the size to 2048
bits and restarts the VC
Web Server.
save ssl-csr
address=
user:password
@IPv4Address/
[filename]>
save ssl-csr
[-quiet]
address=
user:password
@ipaddress/
[filename]>
CN=server.
domain.com
O="Hewlett-
Packard" C=US
ST=CA
L=Cupertino
[OU=]
[Contact=
]
[Alternative
Name=]
[Email=]
[Surname=
]
[GivenName=
]
[Initials=
]
[DNQualifier=
]
[ChallengePW=
ConfirmPW=
]
[Unstructured
Name=]
reset statistics This command now resets
statistics for the port and its
available subports.
Reset per-port statistics
for the specified port
ID
Resets per-port
statistics for the
specified port ID and
its associated subports
show statistics This command now
displays common statistics
for the subport.
Displayed common
statistics for the port
Displays common
statistics for the
port/subport
set statistics-
throughput
This command now enables
configuration of sample
rate settings.
set statistics-
throughput
alse]>
set statistics-
throughput
<[Enabled=
false>]
[SampleRate=
<1m|2m|3m|4m|5m|
1h>]>
show statistics-
throughput
This command now
displays the current
throughput statistics
settings, including
throughput statistics for
subports.
show statistics-
throughput
show statistics-
throughput
add user
set user
The default password for
these commands was
updated from 3 characters
to 8 characters.
The default value for
the Password
property is 3
characters.
The default value for
the Password
property is 8
characters.