Aiphone JKW-IP - Manual (Page 25)

24 25
IP Video Intercom Adaptor Settings
Select Input latch and Sensor IN settings between 1 and
4 and make optional settings.
*1
*1 The following table shows the detection operation of sensor
input if the input latch setting of the IP Video Intercom
Adaptor is different from the sensor input settings of the
master monitor station.
Input latch settings
for IP Video
Intercom Adaptor
Sensor input
settings for master
monitor station
Detection operation of
sensor input
30 sec. Continuous
Sensor Detection Tone:
30 sec.
[Sensor] display:
Continuous
Continuous 30 sec. 30 sec.
2.
Enter the Output Duration for Option OUT.
Set the Output Duration to between 0 and 600 seconds.
When set to 0 seconds, it is only output when the "OPTION"
button is clicked.
Click [SAVE].
"[Sensor IN / Option OUT] Setting has been saved." is
displayed, the Sensor input / Option output are set, and you
are returned to the Administrator Settings window.
MEMO
Setting operations are canceled if you click [CANCEL], and
you are returned to the Administrator Settings window.
All settings are returned to their factory default settings
if you press the IP Video Intercom Adaptor default setting
switch for 5 seconds or more.
•
•
3.
4.