beautypg.com

5 installing the pc application, 4 starting up the ip video intercom adaptor – Aiphone JKW-IP User Manual

Page 12

background image

12

INTRODUCTION

13

Install the PC Application on your computer from the CD supplied with this product.
You may need to be logged on to your computer as the Administrator to install the PC Application.

1-5-1 System Requirements

1-5 Installing the PC Application

Provisional registration

Registration : Administrator/User

Your computer must meet the following system requirements to use the PC Application.
Check the Operation Manual supplied with your computer.

OS

Windows XP Home/Professional(SP3),
Windows Vista Ultimate/Home/Business/Enterprise(SP1)/32-bit version/64-bit version
Windows 7 Home Premium/Professional/Enterprise/Ultimate/32-bit version/64-bit version

PC system

requirements

Processor: 2 GHz or faster
System memory (RAM): 1 GB RAM or more
Hard disk: 10 MB or more (additional space is needed for recording)
Sound card: 8 bit full duplex, Direct Sound compatible
Display: 1024 x 768 or greater
Run-time: Microsoft(R).NET Framework 2.0 or later
Network: 10BASE-T/100BASE-TX Ethernet

Protocol

TCP/IPv4, UDP/IPv4, SIP, Others

Network bandwidth

320 k to 8 Mbps (per IP Video Intercom Adaptor)

Language

English, French, Spanish, German, Dutch, Italian, Japanese

Internet Explorer

Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)

The PC Application may not run, or may not operate correctly (such as freezes occurring) on a computer with specifications

below the necessary requirements.

Serious damage could be caused if an error occurs during door release.
We recommend using a computer that exceeds the basic system requirements.

Use the following steps to start up the IP Video Intercom Adaptor.

Check that the wires are connected correctly.

Turn on all connected equipment except for the IP Video Intercom Adaptor.

Turn on the POWER switch for the IP Video Intercom Adaptor.

The POWER indicator (Green) and the LAN ACT indicator (Orange) light,
and the STATUS indicator (Orange) blinks.

STATUS indicator

(Orange) blinking

MEMO

For more information on the indicators, see "Indicator
operation summary" of "IP Video Intercom Adaptor" in
"Names".

P.7

The STATUS indicator (Orange) changes to lit.

The IP Video Intercom Adaptor is now ready for use.

STATUS indicator

(Orange) lit

1.

2.

3.

4.

1-4 Starting up the IP Video Intercom Adaptor

Provisional registration

Registration : Administrator/User