Canon imageCLASS MF5960dn - Manual (Page 99)

6-11
U
sing
the
Fax
Func
tions
This section describes how to receive faxes.
RX Mode
The machine allows you to receive faxes automatically or manually in several different ways.
See the following flowcharts to select the receive mode that you want to use.
The default setting is .
Auto mode
You can receive faxes automatically.
The receive mode varies depending on whether an external telephone is connected to the machine or not.
Operation for when an incoming call is received
Without an external telephone connected
When the call is a fax
When the call is a fax When the call is a fax When the call is a
voice call
When the call is a
voice call
When you pick up the handset while the
incoming call rings When you do not pick up the handset while
the incoming call rings
When the call is a voice call
An incoming call rings for the specified number of times. *
The machine receives
the fax automatically.
The machine does not respond.
You can start talking
as is.
The machine receives the
fax automatically.
You cannot start talking.
With an external telephone connected
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select
using [ ] or [ ] and
press [OK].
(3) Hang up the handset.
* You can set the incoming call ring time using “Incoming Ring” ( →P. 6-25).
RX Mode