Sender id, Check dial tone before sending, P. 6-24) – Canon imageCLASS MF5960dn User Manual
Page 112
6-24
U
sing
the
Fax
Func
tions
Sender ID
Specify whether to add the sender ID to the fax that you are
sending.
The sender ID is printed at the top of each page that you are
sending, along with the fax number and sender’s name. This
helps the recipient to identify the sender.
How to access the option
[
] (Menu)
→ Settings> → Settings (Bold: Default setting) Off No sender ID is added. On Print Location: On Image, Above Image Select the location where the sender ID is printed on the page. Mark No. as: TEL/FAX: FAX, TEL Select the symbol to be added in front of the telephone number. Check Dial Tone Before Sending Specify whether to check for a dial tone before dialing. [ ] (Menu) → Settings> → Settings (Bold: Default setting) Off Do not check for a dial tone. On Check for a dial tone before dialing. The steps to take for configuring the receiving settings Follow the steps in the procedure below to configure the fax receiving settings. The procedure describes the steps to change the “ECM RX” setting. Keys to be used for this operation OK Menu 1 Press [ ] (Menu). 2 Select [OK]. Menu Fax Settings 3 Select and press [OK]. Fax Settings RX Function Settings RX Print Settings 4 Select RX Function Settings ECM RX Incoming Ring 5 Select [OK]. ECM RX On * Select have specified the setting and press [OK]. 6 Press [ ] (Menu) to close the menu screen. The procedure is complete.
How to access the option
Timer Settings
Common Settings
Copy Settings
Basic Settings
TX Function Settings
Remote RX
Auto RX Switch
Off