Canon imageCLASS MF5960dn - Manual (Page 127)

8-3
M
ain
tenanc
e
Cleaning the Platen Glass
Follow this procedure to clean the platen glass and under
surface of the feeder.
1
Turn OFF the power switch and disconnect the
power cord.
2
Open the feeder.
3
Clean the platen glass and the under surface of
the feeder.
(1) Clean the areas with a cloth dampened with water.
(2) Wipe the areas with a soft, dry cloth.
4
Close the feeder.
5
Connect the power cord and turn ON the power
switch.
Cleaning the Feeder
If your document has black streaks or appear dirty after it has
been scanned from the feeder, the roller inside the feeder may
be dirty. Clean the feeder scanning area and rollers.
1
Turn OFF the power switch and disconnect the
power cord.
2
Open the feeder cover.
3
Clean the rollers (A) inside the feeder with a well
wrung out cloth dampened with water and wipe
them with a soft, dry cloth.
(A)
4
Close the feeder cover.
5
Connect the power cord and turn ON the power
switch.
Cleaning the Feeder Automatically
If your document has black streaks or appears dirty after it has
been scanned from the feeder, the rollers inside the feeder
may be dirty. Clean the roller using blank paper.
Keys to be used for this operation
OK
Menu
1
Press [ ] (Menu).
2
Select using [ ] or
[ ] and press [OK].
Menu
Scan Settings
USB Direct Print Se
...
Printer Settings
Adjustment/Maintenan