Canon imageCLASS MF5960dn - Manual (Page 170)

11-2
A
ppendix
Machine Specifications
Machine Specifications
Type Personal Desktop
Power Supply
120 to 127 V, 60 Hz (Power requirements can
vary by country. They depend on where you
purchased the product.)
Power Consumption
• Maximum: 1,100 W or less
• Average consumption during standby mode:
Approx. 9 W
• Average consumption during sleep mode:
Approx. 2.3 W
Approx. 3.0 W (by Wireless Connections)
Warm-up Time
11 seconds or less*
(Temperature: 68 °F (20 °C), humidity: 65%
RH ; from when the machine is turned ON
using the main power switch to when the
standby screen is displayed)
* Warm-up time may vary depending
on the conditions of the installation
environment.
Weight
Main unit (the toner cartridge included):
Approx. 42.1 lb (19.1 kg)
Dimensions
(W x L x H)
• In the normal state
15 3/8” x 18 5/8” x 17”
(390 mm x 473 mm x 431 mm)
• When the optional drawer is installed
15 3/8” x 18 5/8” x 22 3/8”
(390 mm x 473 mm x 569 mm)
Installation Space
(W x L x H)
• In the normal state
23 1/4” x 50 3/8” x 31 3/8”
(590 mm x 1,279 mm x 795 mm)
• When the optional drawer is installed
23 1/4” x 50 3/8” x 36 3/4”
(590 mm x 1,279 mm x 933 mm)
Environmental
Conditions
Temperature: 50 to 86°F (10 to 30°C)
Humidity: 20% to 80% RH (no condensation)
Acceptable Documents See “Supported Document Types” ( →P. 2-2)
Acceptable Paper Stock See “Supported Paper Types” ( →P. 2-6)
Printable Area See “Printable Area” ( →P. 2-8)
Scan Area See “Scan Area” ( →P. 2-2)
Wireless LAN Specification (MF5950dw Only)
Wireless LAN Specification
Standard IEEE802.11g/IEEE802.11b/IEEE 802.11n*
Transmission
Scheme
DS-SS System/OFDM System
Frequency Range 2412 to 2472 MHz
Data
Transmission
Rate
• IEEE802.11g
6/9/12/18/24/36/48/54 Mbps
• IEEE802.11b
1/2/5.5/11 Mbps
• IEEE 802.11n
- SGI Invalidated 20 MHz :
6.5/13/19.5/26/39/52/58.5/65 Mbps
- SGI Validated 20 MHz :
7.2/14.4/21.7/28.9/43.3/57.8/72.2 Mbps
- SGI Invalidated 40 MHz :
13.5/27/40.5/81/108/121.5/135 Mbps
- SGI Validated 40 MHz :
15/30/45/60/90/120/150 Mbps
Communication
Mode
Infrastructure Mode
Security
WEP, WPA-PSK (TKIP/AES-CCMP), WPA2-PSK (TKIP/
AES-CCMP)
* WPS (Wi-Fi Protected Setup), Connection can be established by
manually setting values.
Copy Specifications
Copy Specifications
Scan Resolution
• Text/Photo: 300 dpi x 600 dpi
• Text/Photo (Quality), Photo, Text: 600 dpi
x 600 dpi
Output Resolution 600 dpi x 600 dpi
Copy Ratio
• Direct 1:1 ± 1.0 %
• Enlargement 1:4.00, 1:2.00, 1:1.29
• Reduction 1:0.78, 1:0.64, 1:0.50, 1:0.25
• Zoom 0.25 to 4.00, 1% increments
Copy Speed (Letter
Plain Direct)*
35 cpm
Continuous Copying
Capacity
Maximum 99 copies
First Copy Time
(Letter)
8 seconds or less
* The copy speed on Letter size plain paper on one-side printing
is measured during continuous copying. Copy speeds vary
depending on the paper type and size, as well as the paper feeding
direction. Copy speeds on smaller paper sizes may be slower.
Plus, the machine may experience downtime or decrease the
copy speed in the middle of a continuous copy run to adjust the
temperature inside the machine or maintain the optimal print
quality.
Printer Specification
Printer Specification
Printing Method
Indirect electrostatic system (On-demand
fixing)
Paper Capacity
Multi-purpose tray: Approx. 50 sheets (16 to
23 lb Bond (60 to 89 g/m²))
Paper drawer: Approx. 250 sheets (16 to 23
lb Bond (60 to 89 g/m²))
Paper Feeder Unit PF-44 (Optional): Approx.
500 sheets (16 to 23 lb Bond (60 to 89 g/m²))
Output Tray Capacity
(a fresh stack of
Letter size paper)
Output tray: Approx. 150 sheets (20 lb Bond
(75 m/g2))* 1
Sub Output tray: 1 sheet
Print Speed (Letter
Plain Direct)* 2
35 ppm
First Print Time
(Letter)
6 seconds or less* 3
Output Resolution Equivalent to 1200dpi x 600dpi
Gradation 256 gradations
Toner Cartridge See “Replacing the Toner Cartridge” ( →P. 8-8)
* 1 The actual paper capacity varies depending on the installation
environment and paper type used.
* 2 The print speed on Letter size plain paper on one-side printing is
measured during continuous printing. Print speeds vary depending
on the paper type and size, as well as the paper feeding direction.
Print speeds on smaller paper sizes may be slower. Plus, the
machine may experience downtime or decrease the print speed
in the middle of a continuous print run to adjust the temperature
inside the machine or maintain the optimal print quality.
* 3 May vary depending on the output environment.
Main Specifications