Canon imageCLASS MF5960dn - Manual (Page 128)

8-4
M
ain
tenanc
e
3
Select using [ ] or [ ] and press
[OK].
Adjustment/Maintenance
Black Text Processi
...
Special Processing
Clean Fixing Unit
Clean Feeder
4
Load 10 sheets of A4 or Letter size plain paper in
the feeder, and then press [OK].
The cleaning begins. It takes approximately 44 seconds to
complete the process.
Clean Feeder
Load 10 sheets of A4
or LTR in feeder.
Start
5
Press [ ] (Menu) to close the menu screen.
Precautions When Cleaning the Machine
Before cleaning the machine, note the following.
• Make sure that no jobs are stored in memory before
turning OFF the power switch and disconnecting the
power cord.
• Use a soft cloth to avoid scratching the components.
• Do not clean the machine components with tissue paper,
paper towels, or similar materials. These materials tend to
stick to the components or generate static charges.
NOTE
About sending or receiving faxes
When the power plug is unplugged, the machine cannot send or
receive faxes.
When a job is waiting to be printed
The job is deleted when you turn OFF the power switch.
About jobs stored in memory
Jobs can be stored in memory for approximately an hour after the
power plug has been unplugged. To view jobs stored in memory,
see the following.
“Managing Faxes Stored in Memory” ( →P. 6-18)
CAUTION
Precautions to take when cleaning the feeder
Do not dampen the cloth too much, as this may tear the
document or damage the machine.
Precautions to take when closing the feeder
Be careful not to get your fingers caught.
Precautions to take when you get toner onto your
hands or into clothing
If toner gets on your hands or clothing, wash them
immediately with cold water.
The toner sets onto hands or into clothing if you try to wash
it with warm water. Once it is set, you can hardly remove the
toner stains.