Monitoring the logged events, Manually stopping the auto logging session, Operating procedures – Dwyer Series PUF User Manual

Page 34

3: Operating Procedures

Monitoring the logged events

11. If you wish to view the logging progress at any time while you are operating in

FLOW READING mode, press

the

Logger function key as described above to access the REAL TIME LOGGER screen. You can then select

View log as text or View log as graph, as required, without interfering with the logging operation.
This is described in detail in procedure Paragraph 3.6.3.

Manually stopping the auto logging session

Note: The

REAL TIME LOGGER Sleep Mode function is not implemented in the PUF instrument.

Select

Set auto start. This enables the auto

logging application.

Note: If

Set Auto start is enabled with

valid start and stop times, this entry will change
to

Cancel Auto start.

To cancel the automatic logging session before it
commences, click the

Cancel Auto Start.

10. Select

Exit to return to the FLOW READING

screen.

REAL TIME LOGGER

DD-MM-YY HH:MM:SS

4-20mA O/P is ON. Qxx.xx%

Unit : gal/min

Log name : Quickstart

Log data to : Memory

Logging interval : 10 seconds

Start date & time : dd-mm-yy hh:mm:ss

Stop date & time : dd-mm-yy hh:mm:ss

MM DD HH MM SS

Remaining time : mm dd hh mm ss

Sleep Mode : Off

Extended Intervals : Stop

Graph Y axis max. : 50

View log as text

View log as graph

START NOW

Cancel Auto Start

Clear log

Exit

12. The logging session will stop automatically at the

programmed

Stop date & time.

13. If you wish to manually stop logging earlier than

programmed, press the

Logger function key to

access the

REAL TIME LOGGER screen then

select

STOP NOW to cease logging.

14. Select