KEPCO EL Series Electronic Load Operator Manual P/N 243-1295 Firmware Version 4.00 to 4.xx - Manual (Page 83)

SERIES EL 071414
B-15
B.81 STATus:QUEStionable:ENABle? QUERY
STAT:QUES:ENAB?
Syntax: Short Form: STAT:QUES:ENAB? Long Form: STATus:QUESionable:ENABle?
Return Value: =16 bits = actual Questionable enable register value
Description: Reads Questionable Condition Enable Register. Electronic load returns value of Questionable
Condition Enable Register, indicating which conditions are being monitored. Bit set to 1 = function
enabled (active, true); bit reset to 0 = function disabled (inactive, false)
.
B.82 SYSTem:COMMunicate[:GPIB]:ADDRess COMMAND
SYST:COMM[:GPIB]:ADDR
Syntax: Short Form: SYST:COMM[:GPIB]:ADDR
Long Form: SYSTem:COMMunicate[:GPIB]:ADDRess
Where: = numbers from 1 to 30 comprising the GPIB Address. Factory default GPIB address
is 10.
Description: Sets the GPIB Address to be used during communication over the GPIB interface. After setting
the address, the EL Load must be power cycled (turned off, then on) in order for the new GPIB
address to take effect. Command is not valid from the GPIB interface.
B.83 SYSTem:COMMunicate[:GPIB]:ADDRess? QUERY
SYST:COMM[:GPIB]:ADDR?
Syntax: Short Form: SYST:COMM[:GPIB]:ADDR?
Long Form: SYSTem:COMMunicate[:GPIB]:ADDRess?
Returns: = number from 1 to 30 comprising the GPIB Address
Description: Returns the GPIB Address used during communication over the GPIB interface. Command is
not valid from the GPIB interface.
B.84 SYSTem:COMMunicate:ECHO COMMAND
SYST:COMM:ECHO
Syntax: Short Form: SYST:COMM:ECHO Long Form: SYSTem:COMMunicate:ECHO
Where: 1 or ON turns on echo, 0 or off turns off echo
Description: Causes the EL Load to return the parsed string to the user. The parsed string may not be the com-
plete string sent to the EL; the parsed string contains the short form mnemonic for the command. Fac-
tory default is SYST:COMM:ECHO off.
B.85 SYSTem:COMMunicate:ECHO? QUERY
SYST:COMM:ECHO?
Syntax: Short Form: SYST:COMM:ECHO? Long Form: SYSTem:COMMunicate:ECHO?
Returns: 1 if echo is on, 0 if echo is off
Description: Indicates whether echo is on or off.
B.86 SYSTem:COMMunicate:LAN:IPADdress COMMAND
SYST:COMM:LAN:IPAD
Syntax: Short Form: SYST:COMM:LAN:IPAD
Long Form: SYSTem:COMMunicate:LAN:IPADdress
Where: = numbers from 0 to 255 comprising the IP Address
Description: Sets the IP address to be used during LAN communication.
B.87 SYSTem:COMMunicate:LAN:IPADdress? QUERY
SYST:COMM:LAN:IPAD?
Syntax: Short Form: SYST:COMM:LAN:IPAD?
Long Form: SYSTem:COMMunicate:LAN:IPADdress?
Returns: = numbers from 0 to 255 comprising the IP Address
Description: Returns the IP Address used during LAN communication.