GW Instek GDS-1000 Series User Manual - Manual (Page 96)

GDS-1000 Series User Manual
96
F
AQ
• The input signal does not appear in the display.
• I want to remove some contents from the display.
• The waveform does not update (frozen).
• The probe waveform is distorted.
• Autoset does not catch the signal well.
• I want to clean up the cluttered panel settings.
• The accuracy does not match the specifications.
• The SD card slot does not accept my card.
The input signal does not appear in the display.
Make sure you have activated the channel. If not, press the CH key.
If the signal still does not appear, press the Autoset key.
I want to remove some contents from the display.
To clear the math result, press the Math key twice (page49).
To clear the cursor, press the Cursor key again (page46).
To clear the Help contents, press the Help key again (page35).
The waveform does not update (frozen).
Press the Run/Stop key to unfreeze the waveform. See page38 for
details. For trigger setting details, see page64.