GW Instek GDS-1000 Series User Manual - Manual (Page 55)

CONFIGURATION
55
Display
The Display section describes how to configure the display settings:
drawing type, waveform accumulation, contrast adjustment, and
grid settings.
Selecting the vector or dot drawing
Procedure 1. Press the Display key. Display
2. Press Type repeatedly to
select the waveform
drawing.
Types Dots Only the sampled dots are displayed.
Vectors The sampled dots are connected by
lines.
Accumulating the waveform
Background Accumulation preserves the old waveform
drawings and overwrites new waveforms on top
of it. It is useful for observing waveform variation.
Procedure 1. Press the Display key. Display
2. Press Accumulate to turn on
the waveform accumulation.
3. To clear the accumulation
and start it over (refresh),
press Refresh.
Refresh
(Continued on next page)