GW Instek GDS-1000 Series User Manual - Manual (Page 89)

SAVE/RECALL
89
Recalling a reference waveform to the display
Procedure 1. The reference waveform must be stored in
advance. See page83 for details.
2. Press the Save/Recall key. Save/Recall
3. Press Display Refs. The
reference waveform display
menu appears.
4. Select the reference
waveform, Ref A or Ref B,
and press it. The waveform
appears on the display and
the period and amplitude of
the waveform appears in the
menu.
5. To clear the waveform from
the display, press RefA/B
again.