GW Instek GDS-1000 Series User Manual - Manual (Page 66)

GDS-1000 Series User Manual
66
> Longer than = Equal to
< Shorter than ≠ Not equal to
Trigger slope Triggers on the rising edge.
Triggers on the falling edge.
Trigger coupling AC Triggers only on AC component.
DC Triggers on AC+DC component.
Frequency
rejection LF Puts a high-pass filter and rejects the
frequency below 50kHz.
HF Puts a low-pass filter and rejects the
frequency above 50kHz.
Noise rejection Rejects noise signals.
Trigger level LEVE L Using the trigger level knob moves the
trigger point up or down.