GW Instek GDS-1000 Series User Manual - Manual (Page 82)

GDS-1000 Series User Manual
82
Saving the panel settings
Procedure 1. (For saving to an external
SD card) Insert the card into
the slot.
2. Press the Save/Recall key
twice to recall the Save
menu.
Save/Recall Save/Recall
3. Press Save Setup.
4. Press Destination repeatedly
to select the saved location.
Use the Variable knob to
change the internal memory
location (S1 ~ S15).
VARIABLE
Memory Internal memory, S1 ~ S15
SD card External card, no practical
limitation for the amount of file.
When saved, the setup file will be
placed in the root directory.
5. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or SD card is
disconnected before completion.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page77.
File
Utilities