Configuring the video trigger – GW Instek GDS-1000 Series User Manual User Manual

Page 68

GDS-1000 Series User Manual

8. Press Rejection to select the

frequency rejection mode.

Rejection

Off

Range

LF, HF, Off

9. Press Noise Rej to turn the

noise rejection on or off.

Noise Rej

Off

Range

On, Off

10. Press Previous menu to go

back to the previous menu.

Configuring the video trigger

Procedure

1. Press the Trigger menu key.

2. Press Type repeatedly to

select video trigger. The
video trigger indicator
appears at the bottom of the
display.

Type

Video

3. Press Source repeatedly to

select the trigger source
channel.

Source

CH1

Range

Channel 1, 2

4. Press Standard repeatedly to

select the video standard.

Standard

NTSC

Range

NTSC, PAL, SECAM

5. Press Polarity repeatedly to

select the video signal
polarity.