GW Instek GDS-1000 Series User Manual - Manual (Page 45)

MEASUREMENT
45
Automatically measuring the input signals
Viewing the
measurement
result 1. Press the Measure key. Measure
2. The measurement results appear on the menu
bar, constantly updated. Press the menu to
change its measurement item.
Selecting a
measurement
item 1. Press F3 repeatedly to select
the measurement type:
Voltage or Time.
2. Use the Variable knob to
select the measurement
item.
VARIABLE
3. Press Previous Menu to
confirm the item selection
and to go back to the
measurement results view.