GW Instek GDS-1000 Series User Manual - Manual (Page 19)

GETTING STARTED
19
6. Press the Autoset key. A
square waveform will
appear in the center of the
display. For details of the
Autoset, see page37.
7. Press the Display key, then
Type and select the vector
waveform.
8. Turn the adjustment point on the probe to
flatten the square waveform edge.
Over
Compensation
Normal
Under
Compensation
9. Setting up the oscilloscope is completed. You
may continue with the other operations.
Measurements: page36 Configurations: page52