GW Instek GDS-1000 Series User Manual - Manual (Page 90)

GDS-1000 Series User Manual
90
Recalling panel settings
Procedure 1. (For recalling from an
external SD card) Insert the
card into the slot.
2. Press the Save/Recall key. Save/Recall
3. Press Recall Setup.
4. Press Source repeatedly to
select the file source,
internal or external
memory. Use the Variable
knob to change the memory.
Source
Memory
VARIABLE
Memory Internal memory, S1 ~ S15
SD card External card, no practical
limitation on the amount of file. The
setup file must be placed in the root
directory to be recognized.
5. Press Recall to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned Off or SD card is
disconnected before completion.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page77.