GW Instek GDS-1000 Series User Manual - Manual (Page 87)

SAVE/RECALL
87
Recall
File type/source/destination
Item Source Destination
Default panel
setup  Factory installed
setting  Current front panel
Reference
waveform  Internal memory: A, B  Current front panel
Panel setup
(DSxxxx.set)  Internal memory: S1 ~
S15
 External memory: SD
card
 Current front panel
Waveform data
(DSxxxx.csv)  Internal memory: W1 ~
W15
 External memory: SD
card
 Reference waveform
A, B
SD Card
restriction The GDS-1000 series accept the following SD card.
Size: 2GB or less
Format: FAT or FAT32
Recalling the default panel settings
Procedure 1. Press the Save/Recall key. Save/Recall
2. Press Default Setup. The
factory installed setting will
be recalled.
Setting contents The following is the default panel setting contents.
Acquisition Mode: Normal