GW Instek GDS-2000A series Option User Manual - Manual (Page 43)

LOGIC ANALYZER
43
Press Enter Character to select a
number or letter.
Press Back Space to delete a
character.
Press Editing Completed to create
the new label and return to the
previous menu.
Note: this key must be pressed to
create a label, even for a preset
label.
Press Cancel to cancel the editing
and return to the Edit Label
menu.
7. The label will appear next to corresponding
channel indicator.
Below, the label “LABEL_1” was created for
the D0 channel.
D0 is labeled as
LABEL_1
Remove Label Press Label Display to toggle the
selected label on or off.