GW Instek GDS-2000A series Option User Manual - Manual (Page 23)

FUNCTION GENERATOR
23
Fine adjustment
mode
Left and
Right soft-
keys
Default
Go Back
5. Press the Amplitude key to set the
amplitude.
Range 300mVpp ~ 3Vpp (into 50Ω load)*.
*range depends on attenuation
settings.
6. Press the Offset key to set the DC
offset.
Range ±1.000V (into 50Ω load).
7. Press DutyCycle (Square wave
only) to set the duty cycle.
Range 5% to 95%.
8. Press -20dB to attenuate the output
by 20dB.
Range ON, OFF
9. The signal will be output immediately from the
GEN 1 or GEN 2 outputs.