Triton RT2000 User Manual User Manual
Page 91
7 1
M
ANAGEMENT
F
UNCTIONS
F
ACTORY
D
EFAULT
: N/A
A
CCESS
I
NSTRUCTIONS
:
1.
From the MAIN MENU screen,
select the DIAGNOSTICS option
by pressing number (2) on the
keypad.
2.
Enter the DISPENSER diagnos-
tics menu by pressing number
(4) on the keypad.
3.
To modify the CASSETTE PA-
RAMETERS, press number (8)
on the keypad.
C
ASSETTE
P
ARAMETERS
Description:
The following options will be available from the C
ASSETTE
P
ARAMETERS
screen:
(Note:
*
denotes service provider function)
1.
Relearn Bill Thickness. Relearn the thickness of the documents loaded in the
cassette.
2.
All Cassettes Locked/Unlocked. Physically lock or unlock ALL cassettes in the
dispensing mechanism chassis. (Note: Applicable to NMD-family dispensers only)
3.
Enable Extension Rejects. When enabled, allows the extension to automatically
purge any notes detected as remaining in the extension. This is done at power up or
as part of a dispense operation. When disabled, the notes will remain in the extension
and the unit will go “Out of Service”. A Purge operation will always try to purge the
extension. Note: Any notes purged from the extension are dropped into the cabinet.
4.
*Retract Delay.* Determine the amount of time the dispenser will wait before
retracting the bundle carriage unit.
5.
Activate Cassette. Select the cassette that will receive the results of any change to
the various cassette and note configuration parameters that are accessed via the
Cassette Parameters dialog.
6.
Cassette In Service. Places the currently selected cassette In or Out of Service.
7.
Multiple Amount. Set the denomination of the currency in a cassette.
8.
Document Type. Enter the type of document in the cassette: Cash or Non-Cash.
9.
Non-Cash Item Description. Enter up to 28 characters describing the Non-Cash
item in the active cassette.
0.
Secondary Item Description. Enter up to 28 characters of general information
about the Non-Cash item in the active cassette or other information as required.
F1
*Note Configuration*. This function allows you to configure the note specific
operating parameters for the active cassette.