Triton RT2000 User Manual - Manual (Page 159)

A-5
A
PPENDIX
A - M
ECHANICAL
/E
LECTRONIC
L
OCKS
Entering the Combination
The electronic lock combination consists of six digits. Upon arrival, the combination
of the lock should already be set at 1-2-3-4-5-6. After installation of the unit has
been completed, perform the following steps:
1. Enter the preset combination and check for proper operation. After each
keypress, the lock will beep. After the final digit has been entered, the lock will
beep twice and the open period will begin.
2. When a valid combination has been entered, the operator will have approximately
3 seconds to open the lock.
3. To open the lock, turn the dial clockwise.
4. After the lock is opened, the door latch may be turned and the safe opened.
Change the Combination
Operating the Electronic Lock
**Warning**
Never leave the factory default combination in the lock! Change the
combination as soon as possible to help protect the security of the vault.
To change the combination of the lock, simply follow these directions:
• Enter six zeros.
• Enter the current combination. (Initially set at 1-2-3-4-5-6)
• Enter the new combination twice.
• The combination is now changed. Enter the new combination to open the lock.
*Important*
Before closing the vault door, try the new combina-
tion several times.