Triton RT2000 User Manual - Manual (Page 101)

8 1
M
ANAGEMENT
F
UNCTIONS
F
ACTORY
D
EFAULT
: N/A
A
CCESS
I
NSTRUCTIONS
:
1. From the MAIN MENU screen,
select the DIAGNOSTICS option
by pressing number (2) on the
keypad.
2. Enter the CARD READER diag-
nostics menu by pressing num-
ber (5) on the keypad..
3. To use the SCAN CARD diag-
nostics, press number (3) on the
keypad. .
S
CAN
C
ARD
D
ESCRIPTION
:
The S
CAN
C
ARD
function uses a series of dialogs to report the operation of the card
reader. The dialog shown above is displayed when the function is first entered. It
prompts you to insert and then remove a card. As these actions are performed, the
results are displayed in the dialog. Upon removing the card, a Management Report
dialog is displayed:
If the card is damaged or not a standard format, an error message will be displayed.
If this happens, the card cannot be used for transactions on the terminal.
If the card can be read properly, the in-
formation from the tracks on the card
will be displayed in a Management Re-
port.