Triton RT2000 User Manual - Manual (Page 181)

C-15
A
PPENDIX
C - A
DS
G
RAPHICS
U
PDATING
T
ERMINAL
S
OFTWARE
This step procedure describes how to per-
form a software update for the RT2000. You
will need a Flash drive device (USB stor-
age device) with the terminal software
loaded in it.
1. From the MAIN MENU screen,
select the SYSTEM PARAM-
ETERS option by pressing the
number (5) on the keypad.
2. Open the cabinet sleeve door.
Locate the Docking Board as-
sembly shown below. Connect
the Flash drive to any of the 4
USB ports available.
3. If your Flash drive has an indi-
cator, it will light briefly, then
extinguish. When light extin-
guishes, this indicates the stor-
age device has been found by
the operating system of the
ATM. If your Flash drive does
not have an indicator, proceed
to the next step.
4. Press the number (7) on the
keypad to access the SOFT-
WARE UPDATE function. This
function searches for the ter-
minal software setup program
on the external storage device.