Triton RT2000 User Manual - Manual (Page 34)

1 4
M
ODEL
RT2000 U
SER
M
ANUAL
Introduction
This chapter describes the basic operation of the terminal. The following topics are
covered:
1. Control Panel Layout. Describes the layout of the terminal’s control panel.
2. Keypad Operation. Describes the use of the alphanumeric keypads.
3. Menu-Based Operation. This section gives a general overview of the terminal
display interface.
4. Accessing Management Functions. Describes the password entry procedure
that must be followed in order to access the Management Functions area.
5. Customer Transactions. Summarizes the actions involved in typical customer
transactions. In addition, the voice-enabled transactions feature is described.
Control Panel Layout
The user interface of the terminal consists of the LCD display, receipt chute, card
reader, headphone jack (visually impaired), and 24 keys on three keypads. The
primary menu navigation keys are arranged in two four-key groups, one group on
either side of the LCD display. The main keypad consists of 10 alphanumeric keys,
two arrow keys, and four large control keys, all located in a 16-key group beneath the
LCD display.
The keypad has an integral raised Braille symbol to conform to the requirements of
the Americans with Disabilities Act. (See Figure 2-1)
Fig. 2-1. Control panel layout
LCD Screen
Receipt Chute
Main Keypad
Audio Jack
Card Reader
Bill Tray
Control Panel
Light
Back Lit Sign
Menu Keys
Camera Aperture