Rt2000 u, Verify operation of all dispensers – Triton RT2000 User Manual User Manual
Page 58
3 8
M
ODEL
RT2000 U
SER
M
ANUAL
Verify Operation of All Dispensers
1.
After completion of the “Cassette Close” procedures, close and lock the security
cabinet.
2.
In Management Functions Main Menu, select Diagnostics, then Dispenser.
3.
Select the Test Dispense option. Select either individual cassettes that are
installed [“A” ( single cassette dispenser) or “A” or “B” (dual-cassette
dispenser)) or “ALL CASSETTES ”. A prompt appears asking how many
notes to dispense (below). The test dispense operation will start.
4.
The Test Dispense command instructs the dispenser to dispense, minimum,
one note from each installed and operational cassette into the reject vault. This
test exercises the dispenser without sending notes to the exit.
5.
After completion of the Test Dispense, the following prompt is displayed below
- “Test Dispense Completed Successfully - Dispense Count , A: (# of notes), B:
#.
If you have the optional Operator Service Panel:
1.
After completion of the “Cassette Close” procedures, close and lock the security
cabinet.
2.
In the Main Menu screen, select Diagnostics, then Dispenser. Select the Test
Dispense option. Select either individual cassettes that are installed [“A” (
single cassette dispenser) or “A” or “B” (dual-cassette dispenser)) or “ALL
CASSETTES ”. A prompt appears asking how many notes to dispense. The
test dispense operation will start.
3.
After completion of the Test Dispense, a prompt is displayed - “Test Dispense
Completed Successfully - Dispense Count , A: (# of notes), B: #.