Triton 9100 User Manual - Manual (Page 74)

66
M
ODEL
9100 U
SER
M
ANUAL
Figure 5-1. Cut paper between the roll and the
printer feed path.
I
NTRODUCTION
This section of the manual covers preventive and corrective maintenance procedures appropriate for
user personnel. The following areas are covered:
1. R
EPLENISHING
R
ECEIPT
P
APER
. Describes how to replace a spent receipt paper roll.
2. C
LEANING THE
E
NCLOSURE
. The proper way to clean the ATM housing.
3. C
ARD
R
EADER
C
LEANING
. The recommended card reader cleaning technique.
R
EPLENISHING THE
R
ECEIPT
P
APER
NOTE: This operation must be completed with the AC power applied to the ATM.
1. Open the top of the ATM by unlocking the top enclosure and pulling the hinged door forward.
2. If paper remains on the roll, cut or tear the paper between the roll and the printer (Figure 5-1).
*Important*
Should a malfunction occur, DO NOT attempt to service the
unit yourself! Only qualified service personnel are autho-
rized to repair or service the terminal. Contact your Triton
certified service provider!
** Caution **
DO NOT pull receipt paper back-
wards through the printer! This may
leave paper fragments that can cause
paper jams.