Triton 9100 User Manual - Manual (Page 129)

S
UPPLEMENT
B
SB-5
N
ETWORK
S
ETTINGS
This menu area allows for the terminal’s network set-
tings to be configured. These settings are defined in
Section 3, “TCP/IP Configuration” of this manual.
Consult this reference for a complete description on
TCP/IP over Ethernet configuration.
T
RITON
C
ONNECT
H
OST
S
ETUP
Triton Connect must be configured for use with the
new TCP/IP over Ethernet interface as well. Setup
begins from the menu path: T
ERMINAL
C
ONFIGURA
-
TION
> S
ET
T
ERMINAL
P
ARAMETERS
> M
ORE
> T
RITON
C
ONNECT
. The following screens are displayed from
the “S
ET
T
ERMINAL
P
ARAMETERS
> M
ORE
” screen.
From here select T
RITON
C
ONNECT
.
The “Ethernet” button is a status button that indi-
cating the terminal is equipped with the external
Ethernet module. This nullifies the dial-up option
(should be grayed). From this screen, the “TCP/IP
Configuration” option should be selected to enter
the configure options for TCP/IP over Ethernet as-
sociated with Triton Connect, as detailed in Section
3, “TCP/IP Configuration” of this manual.