Triton 9100 User Manual - Manual (Page 136)

M
ODEL
9100 U
SER
M
ANUAL
SB-12
C
LEAR
T
AMPER
This option is only displayed if the terminal has
detected a tamper condition from the VEPP de-
vice. Once the item is selected the terminal user
will get the following screen describing what ac-
tions need to be taken.
C
LEAR
S
ERIAL
T
AMPER
This option is only displayed when the serial num-
ber of the VEPP device does not match the VEPP
device serial number that the terminal has stored.
This is not a VEPP device tamper but an indica-
tion that the terminal may have been tampered
with. If this condition is detected the following
screen is displayed when the Terminal user se-
lects Clear Serial Tamper. When this error is
cleared, the Serial number of the connected VEPP
is written to the terminal.
K
EYPAD
D
IAGNOSTIC
M
ENU
This menu is dynamic. The clear error codes
(Tamper or Serial) will only appear when either
error is detected on the terminal. The VEPP Status
button will print a current status of the VEPP on
to the screen with the option to print the data in a
more detailed form.
VEPP S
TATUS
This screen is completed by the status informa-
tion that was received from the VEPP device. The
Print option will give a receipt that has more de-
tailed information.