Triton 9100 User Manual - Manual (Page 57)

49
M
ANAGEMENT
F
UNCTIONS
T
RITON
C
ONNECT
A
LARM
N
UMBERS
D
ESCRIPTION
:
The A
LARM
N
UMBERS
are provided by your Processor/
Host Network Administrator. If you are using TCP/IP as
your communication type, you will need to enter A
LARM
TCP/IP A
DDRESSES
. The first part of the address consists
of a sequence of four groups of numbers. Each group can
be up to three digits long, and each group is separated by
a period (dot character), as in this example: 123.3.01.99
The second part of the address is a Port Number, consisting
of four (4) digits or less, separated from the first part by a
comma (“,”) character, as in this example:
123.3.01.99,9043.
Follow these steps to initially enter or change the P
RIMARY
A
LARM
N
UMBER
(A
DDRESS
):
! Select to blank the current entry, if necessary.
!
Enter the first group of numbers in the TCP/IP Address
using the main keypad keys.
!
Enter a ‘dot’ character by pressing the key,
then the <0> key Twice to select the period’, then the
key to lock it in.
!
Repeat Steps 2 and 3 for the second and third group of
numbers in the TCP/IP Address.
!
Enter the fourth group of numbers in the TCP/IP
Address.
!
Enter the comma (“,”) character by pressing the
key, then the <0> key Once to select the
comma. Press the key to lock it in.
! Enter the P
ORT
N
UMBER
. Select to save the
Primary Alarm TCP/IP Address entry or to
discard the changes. Repeat steps for B
ACKUP
A
LARM
N
UMBER
(A
DDRESS
) entry.