Triton 9100 User Manual - Manual (Page 128)

M
ODEL
9100 U
SER
M
ANUAL
SB-4
S
ET
T
ERMINAL
P
ARAMETERS
This menu incorporates the configuration options
for many terminal specific items. The items of inter-
est accessible from this menu level for this release
are Cassette Setup, Key Management, and TCP/IP
over Ethernet Communication (both Host and Triton
Connect) setup.
H
OST
TCP/IP S
ETUP
With the induction of TCP/IP over Ethernet capable software the menu structure has been updated to
include the options associated with the new communications type. This section details the Host TCP/IP
over Ethernet options
1 .
1 Please note that the terms TCP/IP and Ethernet refer corporately to the new TCP/IP over Ethernet
communications option. Technically, TCP is the transport protocol, IP is the Network layer protocol, and
Ethernet is the Data Link and PHY
layers. The installation and user guide reference may illustrate screen shots that say “TCP/IP” where the
terminal displays “Ethernet”. These should be understood to be reference the same external TCP/IP over
Ethernet external module.
H
OST
TCP/IP C
ONFIGURATION
In this menu, the user can configure the network
settings of the terminal and can test the TCP/IP.
H
OST
T
ERMINAL
C
OMMUNICATIONS
When selecting the “Communication” option from
the “Terminal Parameters” menu, the user will be di-
rected to the Host TCP/IP over Ethernet setup op-
tions. The new communication menu has the follow-
ing appearance and maps directly to host communi-
cations: