Triton 9100 User Manual - Manual (Page 70)

62
M
ODEL
9100 U
SER
M
ANUAL
R
EPLENISH
C
ASSETTE
M
ECH
10 (M
INI
M
ECH
)
2. To remove the note tray, grasp the tray handle and slide the tray out of the mechanism. Place note
tray on a flat level surface.
3. Remove any rejected notes. The reject compartment is located nearest the handle side of the tray.
1. Unlock and open the security cabinet door.
Removing note tray from the
dispensing mechanism.
Removing rejected notes.
Note: You may wish to record the number of notes removed from the reject compartment for use when
balancing the note tray against the cassette/day close records.
L
OADING THE
N
OTE
T
RAY
1. Move the pusher plate to the rear of the tray (toward the handle). Ensure the pusher plate is fully
back. Maintain pressure on the pusher plate as needed while loading notes.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are
being added into the cassette.
3. Add the number of bills being placed into the cassette to the number that remained. The “Total”
number of these bills will be entered in the “E
NTER
Q
TY
.
IN
C
ASSETTE
” option.
4. Place the currency into the cassette. Allow at least one inch of clearance between the packer plate
when it is fully retracted and the currency. This will allow the packer plate to compress the currency.
**WARNING**
DO NOT RECYCLE REJECTED NOTES INTO A CASSETTE!
Doing so could cause more rejects and/or currency jams.