Triton 9100 User Manual - Manual (Page 55)

47
M
ANAGEMENT
F
UNCTIONS
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, select C
ONFIGURE
T
ER
-
MINAL
.
2. From the C
ONFIGURE
T
ERMINAL
screen, select ATM
M
ONITORING
.
3. From the ATM M
ONITORING
screen, select T
RITON
C
ONNECT
.
4. From the T
RITON
C
ONNECT
screen, select TCP/IP
C
ONFIGURATION
.
D
ESCRIPTION
:
The T
RITON
C
ONNECT
function allows
the terminal operator to set up parameters that control D
IAL
-
U
P
and TCP/IP communications between the ATM and
Triton Connect PC-based software to remotely manage your
Triton Systems ATMs. The following TCP/IP parameters
are accessed through this function and described on the
following pages:
! ! ! ! !
Host Numbers
! ! ! ! ! Alarm Numbers
! ! ! ! ! TCP/IP Configuration
** Important **
If using, turn Triton Connect
after entering the Configuration
parameters.
T
RITON
C
ONNECT
TCP/IP C
ONFIGURATION
Note: Comms Type Option
You must have the External Ethernet device
installed. For Model 8100/9100 ATMs, this function
detects the communication type installed (Dialup
or TCP/IP) and will not allow user to change
(toggle).