Triton 9100 User Manual - Manual (Page 115)

S
UPPLEMENT
A
SA-3
M
ANAGEMENT
F
UNCTIONS
Access to editing UDS screen files is achieved using the following method. Note: Only screens that have
changed or have the potential to display new information will be shown.
Select C
ONFIGURE
T
ERMINAL
> M
ORE
> C
HANGE
M
ESSAGES
> S
URCHARGE
M
ESSAGES
> M
ORE
> M
ORE
>
U
SER
D
EFINED
to get to the following screen.
The terminal software will retrieve the primary language screen and display it on the terminal screen. If
there is no screen file saved the display will be blank.
Once on the editing screen, the Right (>) and Left (<) arrow keys can be used to move around on the
display. The cursor will move to the next line automatically when it reaches the end of the current line and
wrap back to the beginning of the first line when it reaches the end of the last line on the screen. Entering
new text will write over the current text. The new file is not saved until the key is selected after the
changes are made. If changes are made and the button is selected, the file won’t change.