Triton 9100 User Manual - Manual (Page 106)

B-4
M
ODEL
9100 U
SER
M
ANUAL
3. Turn change key to the Left until it stops (approximately one-quarter turn). With the change key in
this position, set the new combination as follows: Note: Never select a number from 0 to 20 (the
forbidden zone) as the last number of the combination.
4. Using the ‘Change Index’, turn the dial to the Left stopping when the first number of the new
combination aligns with the ‘Change Index’, the Fourth time.
5. Turn dial to the Right, stopping when the second number is aligned with the ‘Change Index’, the
Third time.
6. Turn the dial to the Left, stopping when the third number is aligned with the ‘Change Index’, the
Second time. Holding the dial in this position, turn the change key back to the Right and remove it.
(See Figure 1.) The new combination you have chosen is now set in the lock,
Figure 1.
*Important*
Before closing the vault door, try the new combi-
nation several times using the ‘Opening Index’.