Temperature curve, Static pressure settings, Minimum vent – Hired-Hand Evolution Series 1200 User Manual
Page 61: Tunnel settings, Vent inlet static pressure, Vent anticipation, Timer cycle _____ (minutes), Tunnel sensors: _____ tunnel on temperature, Tunnel off temperature, Disable tunnel until growout day
![background image](/manuals/362893/61/background.png)
Part No. 4801-5331 Rev 2-08
Evolution 1200
61 of 64
Hired-Hand, Inc.
Poultry House Layout and Specification
3. Temperature
Curve
Target
Growout
Day
4.
Static Pressure Settings
Vent Inlet Static Pressure
_____
Pressure Ramping off of Outside Temperature
Pressure _____ at _____ High Temperature.
Pressure _____ at _____ Low Temperature.
Vent Delay _____
(seconds)
Vent Anticipation _____
(seconds)
5. Minimum Vent
Timer Cycle _____ (minutes)
Day
Timer %
Stages
6. Tunnel
Settings
Tunnel Sensors: _____
Tunnel On Temperature: _____
(Based off of Target Temperature from Section 2)
Tunnel OFF Temperature: _____
(Based off of Target Temperature from Section 2)
Tunnel Target Pressure: _____
Use Low Pressure Alarm in Tunnel: _____
Disable Tunnel until Growout day: _____
Cool Timer for Evaporative cooling
Timer Cycle _____
(minutes)
Max. Run % _____
Min. Run % _____