Hired-Hand Evolution Series 1200 - Manual (Page 4)

Part No. 4801-5331 Rev 2-08 Evolution 1200 4 of 64
1. Ratings and Specifications
HHI Part
Number
Model Power Supply Curtain Output Stage Output
6607-8040
EV-1200-08-00
120/230 VAC 50/60 Hz
½ HP @ 120 VAC
1 HP @ 240 VAC
½ HP @ 120 VAC
1 HP @ 240 VAC
6607-8041
EV-1200-08-01
(Including four
Temperature Sensors)
120/230 VAC 50/60 Hz
½ HP @ 120 VAC
1 HP @ 240 VAC
½ HP @ 120 VAC
1 HP @ 240 VAC
6607-8042
EV-1200-08-02
(Including Static
Pressure Module)
120/230 VAC 50/60 Hz
½ HP @ 120 VAC
1 HP @ 240 VAC
½ HP @ 120 VAC
1 HP @ 240 VAC
NOTE: Room Temperature Must Be Kept Between 32
°F/0°C and 122°F/50°C.
2. Warnings
Warning!
Before connecting power to the controller, be sure to check the position of the
voltage selector switch located next to the transformer on the EVI/O board.
Improper positioning of this switch will cause system failure.
Warning!
Maximum operating temperature of controller is 50
° C (122° F).
Use adequate ventilation to reduce the risk of overheating of controller!
Warning!
When this controller is used in a life support heating and ventilation system
where failure could result in loss or injury, the user should provide adequate
back-up, or accept the risk of such loss or injury!