Hired-Hand Evolution 4000 Control System - Manual (Page 52)

Part No. 4801-5338 Rev 01-10 Evolution 4000 52 of 86
Evolution Software Update
Select HERE if you wish to run the
System software updater. You must have
An SD card with the updated software
inserted into the Evolution SD card
socket.
HERE
Hired-Hand Bootloader Version 7
Updating system software. Please wait…
Current Image ID: 007
Card Image ID: 010
** PASSWORD PROTECTED **
You must enter the current controller
password to continue.
Press the ENTER button to proceed.
Password: 0000
0
NOTE:
Current Image ID is a unique
identifier for the currently installed
software revision. Card Image ID is
the software revision to be installed.
Evolution Software Update
Select HERE if you wish to run the
System software updater. You must have
An SD card with the updated software
Inserted into the Evolution SD card
socket.
HERE
** SD Card Operations **
Save/Load Programs
Load Program from SD Card
Save Program to SD Card
Update Controller Software Version
NOTE:
Software
Updating
Process May
Take Up To 10
Minutes.
IMPORTANT:
During the update process, control
function is disabled.
It is recommended to lock ventilation
equipment ON manually using override
switches for duration of update process.
Update Software Instruction Screens