Davey Speedman Dual Pump Variable Speed Pump Control System - Manual (Page 48)

48
The Speedman can backup settings.
A backup can be created at any time via the “Create Backup” option in the “Restore Options” menu.
Create Backup
A backup is created and stored on the system. This will over write any previously
stored backup. Only 1 backup set of data is possible.
Restore Backup
The backup is restored on the system. This item will be present only if a valid
backup is available.
When restoring the backup, the system will overwrite the current settings with the backup and restart.
**CAUTION** The backup will restore system status to the time of the back up.
If a pump was running when the backup was made it will be running when the backup is restored.
Set Point 2, 3, 4, 5, 6, 7 and 8 Time
Time of day set points allow different set points to be active at a particular time
of day. For example if you enable “Set Point 2 Time” to be “9:00 -> 10:00”, at
9:00 am Set Point 2 will come into effect, and after 10:00 am the default set
point (Set Point 1) will be used again.
Note:
Set Point inputs will override time of day set point selection.
If two or more timed setpoints overlap, then the setpoint that has highest number has priority (2-8 Eight has the
highest priority then 7, then 6 etc).
Create Backup
Press * to Backup
Restore Backup
Press * to Restore
SET POINT 2 TIME
XX:XX -> XX:XX
RESTORE OPTIONS
TIME OF DAY SET POINTS
Time of Day SP
Create Backup *operation*
Restore Backup *operation*
Set Point 2 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 3 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 4 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 5 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 6 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 7 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled
Set Point 8 Time time (hh:mm) (24) Disabled 00:00 – 23-59 Disabled