Lincoln Electric P709 GUARDIAN CONTROL SOLUTIONS - Manual (Page 62)

B-12 OPERATION B-12
Manual call point
• Reset manual call point. See Reset paragraph under
Manual Call Point in Operation Section.
Release
Release of the system after fire is strictly reserved to
skilled and authorized personnel.
POST ALARM PROCEDURE
NO FIRE DETECTED
1. Open the Guardian™ Panel.
2. Press the system reset button.
3. Turn the main input switch off.
4. Wait a minimum of ten seconds.
5. Turn main input switch ON.
6. Wait 20 seconds for system to initialize.
7. Press autostart button. See Figure B.5.
OIL GUARDIAN™ OPERATION
See Oil Guardian™ Instruction Manual for detailed
operating instructions.
GUARDIAN CONTROL™ SOLUTIONS