Operation, Manual operation, Guardian™ fire detection panel keys – Lincoln Electric P709 GUARDIAN CONTROL SOLUTIONS User Manual
Page 59

B-9
OPERATION
B-9
5. Press or to change cursor position. Press
or to change value.
6. Press OK.
NOTE: Timer 1 - screen 4: make sure setting
Pulse = Off.
If desired, Timers 2 to 4 can be used to set addi-
tional on/off moments of the fan, resulting in a start
up of the filter cleaning process.
7. Press several times until Timer 2 shows up. Set
additional time settings.
8. Press ESC (3) three times to return to the date and
time screen.
Press Start.
Press STOP in case of emergency. See
Troubleshooting Section in this manual.
MANUAL OPERATION
To control the system manually, proceed as follows.
1. Press manual start. See Figure B.5.
2. After finishing the job, press AUTO START (auto-
matic). See Figure B.5. 2HR Run Time.
NOTE: Do NOT turn off the main switch. (Refer to
Figure B.5) Make sure power supply and com-
pressed air are available after working hours.
OPERATION
GUARDIAN™ FIRE DETECTION PANEL
KEYS
The Guardian™ Panel comes with a set of 2 keys to
lock and unlock the panel.
NOTE: To avoid improper use, the keys should be
stored securely during normal operation of the
system.
GUARDIAN CONTROL™ SOLUTIONS
FIGURE B.6 – SCP DISPLAY
S
F1
F2
F3
F4
ESC
OK
LOGO! TD
FIGURE B.7 – GUARDIAN™ PANEL
FIRE DETECTION PANEL