IEI Integration KINO-PV-D4253_D5253 - Manual (Page 119)

P age 107
K INO-P V-D5253-D4253 Mini-ITX Motherboard
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.
Figure C-22: Partitions for Linux
Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow
Step 1 ~ Step 3 described in Section C.2.2. Then type the following commands
(marked in red) to create a partition for recovery images.
system32> diskpart
DISKPART> list vol
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> exit
system32> format N: /fs:ntfs /q /v:Recovery /y
system32> exit
Build-up recovery partition. Press any key to boot from the recovery CD. It will take a
while to launch the recovery tool. Please be patient. When the recovery tool
setup menu appears, type <3> and press (Figure C-23). The Symantec
Ghost window appears and starts configuring the system to build-up a recovery
partition. After completing the system configuration, press any key to reboot the
system. Eject the recovery CD.