IEI Integration KINO-HM551 - Manual (Page 94)

KINO-HM551
Page 80

Manual Mode The fan spins at the speed set in:
Manual Duty Cycle Setting
(Min=0, Max=100)
NOTE:
SYS fan functions are supported only when using a 4-pin fan. When
using a 3-pin fan, the functions are not supported.
 First Boundary Temperature [60]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
 Minimum Value: 0°C
 Maximum Value: 127°C
 Second Boundary Temperature [50]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
 Minimum Value: 0°C
 Maximum Value: 127°C